DR5 / DR5.1 / R1T1 / 1.0 / 1.1
Compact 308 - - - Compact 616 - - - Modular 824 - - - MICS
Changing a name on a phone
To enter a programming session, follow the next few simple steps:
1) Press FEATURE * * 2 6 6 3 4 4
2) Enter Password: 2 6 6 3 4 4
Display will read: " A. Configuration"
Using the navigation keys, as displayed below, follow the next simple steps:
3) Press: NEXT
Display will read: "B. General admin"
4) Press: SHOW
Display will read: "1. Sys speed dial"
5) Press: NEXT
Display will read: "2. Names"
6) Press the SHOW
Display will read: "Set names"
7) Press: SHOW
Display will read: "Show set:__"
8) Enter the extension number of which you wish to change the name
Display will read: "<##:name>"
9) Press the CHANGE softkey
10) Using the dial pad spell out the name
Ex: If you need the letter K press the 5 key twice and then press # to confirm
the letter. Continue until the entire first name is spelled. (note: you are limited to 7 characters)
11) Press: NEXT (if you fail to do this step, the name will not be saved!!!)
14) Press the RLS key
Congratulations! You have successfully changed a name on the phone.