How to Change Names on the Nortel Norstar Phone System V.2

norstar program overlay

Nortel Norstar CICS & MICS

Station Name Programming


1. Press FEATURE * * 2 6 6 3 4 4

2. Enter Password: 2 6 6 3 4 4       Display will read: " A. Configuration"
Using the navigation keys, as displayed on the right, follow the next simple steps:


3. Press: NEXT        Display will read: "B. General Admin"


4. Press: SHOW     Display will read: "1. Sys speed dial"


5. Press: NEXT      Display will read: "2. Names"


6. Press the SHOW     Display will read: "Set names"


7. Press: SHOW     Display will read: "Show set:__"


8. Enter the extension number of which you wish to change the name     Display will read: "<##:name>"


9. Press the CHANGE softkey


10. Using the dial pad spell out the name    Ex: If you need the letter K press the 5 key twice and then press # to confirm the letter. Continue until the entire first name is spelled. (note: you are limited to 7 characters)


11. Press: NEXT (if you fail to do this step, the name will not be saved!!!)


12. Press the RLS key